1WARNING

2Site Details

3Battery-Install Location

4Main Service Panel

5Large MSP Circuits

6Sub Panels

7Final Details

WARNING

Electric shock can badly injure or even kill you. Always employ common-sense safety precautions when working with any existing electrical equipment. If you aren't sure whether something can shock you, do not touch it. If you do not feel confident in your ability to acquire the requested information safely, do not attempt to do so. *

I Agree

By checking the box above, you agree:

1) to assume responsibility for your actions while conducting this site survey and any consequence(s) thereof regarding your personal health and safety, and

2) to always assume that all electrical equipment on site at this location is energized and dangerous, and to make a deliberate and sustained effort to avoid making contact with any exposed metal surfaces which you do not know to be unenergized, including—but not limited to—exposed conductors and any bare metal inside of electrical boxes such as bus bars and lug connectors.

Your Name *

First

Last

Your Email Address *

Homeowner Name *

First

Last

Site Details

Location of Utility Meter *

Is Meter Accessible From Street? *

Ground Rod Under Meter *

Backup Generator On Site? *

Photos Checklist *

Close-Up of Utility Meter
Wall Area Surrounding Utility Meter
Generator Nameplate, if applicable
Outside of Generator Automatic Transfer Switch, if applicable
Inside of Generator Automatic Transfer Switch, if applicable

Where applicable, please ensure that your photos are focused well enough such that all writing is clearly legible.

Battery-Install Location

Homeowner's Desired Battery-Install Location *

Please be as specific as possible.

On Interior Wall
On Exterior Wall

Interior Floor under Desired Battery-Install Location *

Wifi Strength at Desired Battery-Install Location *

Unobstructed Wall LENGTH at Desired Battery-Install Location

0 inches

Unobstructed Wall HEIGHT at Desired Battery-Install Location

0 inches

Photos Checklist *

Entire Wall Section from Straight On
Several Angles of Surrounding Area

Main Service Panel

MSP Location *

Please be as specific as possible.

MSP Bus Rating *

This is often listed on a label inside of the door, on the cover itself. If the cover doesn't list the 'bus' or 'panel' rating, completely remove the cover & look for this rating on a label inside of the panel. STAY CLEAR OF ANY BARE METAL INSIDE OF PANEL.

MSP Main Breaker Location *

MSD Location *

Please be as specific as possible.

MSP Main Breaker / MSD Rating *

MSP Number of Open Spaces

0 Spaces

Photos Checklist *

Wall Area Surrounding MSP
Front of MSP with Door CLOSED
Front of MSP with Door OPENED
Close-Up of Main Breaker / MSD
All Circuit Breakers (one photo)
Close-Up of Any Label Listing Loads on Circuits, Panel Manufacturer & Model No., Panel Ratings, etc.
Front of MSP with Cover Removed
Close-Up of Any Label Inside of MSP
Close-Up of Wire-Gauge Listing on Main-Service Wire Sheathing, if visible

Where applicable, please ensure that your photos are focused well enough such that all writing is clearly legible.

1st ≥30A Breaker

1st ≥30A Breaker - SPACE

Space: 0

If none, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

1st ≥30A Breaker - RATING *

1st ≥30A Breaker - FEEDS *

1st ≥30A Breaker - APPLIANCE(S) *

Please list all appliances on this circuit.

2nd ≥30A Breaker

2nd ≥30A Breaker - SPACE

Space: 0

If no 2nd, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

2nd ≥30A Breaker - RATING *

2nd ≥30A Breaker - FEEDS *

2nd ≥30A Breaker - APPLIANCE(S) *

Please list all appliances on this circuit.

3rd ≥30A Breaker

3rd ≥30A Breaker - SPACE

Space: 0

If no 3rd, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

3rd ≥30A Breaker - RATING *

3rd ≥30A Breaker - FEEDS *

3rd ≥30A Breaker - APPLIANCE(S) *

Please list all appliances on this circuit.

4th ≥30A Breaker

4th ≥30A Breaker - SPACE

Space: 0

If no 4th, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

4th ≥30A Breaker - RATING *

4th ≥30A Breaker - FEEDS *

4th ≥30A Breaker - APPLIANCE(S) *

Please list all appliances on this circuit.

5th ≥30A Breaker

5th ≥30A Breaker - SPACE

Space: 0

If no 5th, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

5th ≥30A Breaker - RATING *

5th ≥30A Breaker - FEEDS *

5th ≥30A Breaker - APPLIANCE(S) *

Please list all appliances on this circuit.

Sub Panels

Sub Panel Count

0 Sub Panel(s) On Site

1st Sub Panel

1st Sub Panel - Location *

Please be as specific as possible.

1st Sub Panel - Source *

Sub-Feed Breaker on MSP
Feed-Through Lugs on MSP Bus

1st Sub Panel - Fed by Breaker on MSP in Space

Space: 0

If none, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

1st Sub Panel - Main Breaker Location *

1st Sub Panel - Main Breaker Rating *

1st Sub Panel - Bus Rating *

1st Sub Panel - Number of Open Spaces

0 Spaces

1st Sub Panel - 1st ≥30A Breaker SPACE

Space: 0

If none, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

1st Sub Panel - 1st ≥30A Breaker RATING *

1st Sub Panel - 1st ≥30A Breaker APPLIANCE(S) *

Please list all appliances on this circuit.

1st Sub Panel - 2nd ≥30A Breaker SPACE

Space: 0

If no 2nd, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

1st Sub Panel - 2nd ≥30A Breaker RATING *

1st Sub Panel - 2nd ≥30A Breaker APPLIANCE(S) *

Please list all appliances on this circuit.

1st Sub Panel - 3rd ≥30A Breaker SPACE

Space: 0

If no 3rd, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

1st Sub Panel - 3rd ≥30A Breaker RATING *

1st Sub Panel - 3rd ≥30A Breaker APPLIANCE(S) *

Please list all appliances on this circuit.

Photos Checklist *

Wall Area Surrounding Panel
Front of Panel with Door CLOSED
Front of Sub Panel with Door OPENED
Close-Up of Main Breaker, if applicable
All Circuit Breakers (one photo)
Close-Up of Any Label Listing Loads on Circuits, Panel Manufacturer & Model No., Panel Ratings, etc.
Front of Panel with Cover Removed
Close-Up of Any Label Inside of Panel
Close-Up of Wire-Gauge Listing on Main-Power Feeder Wire Sheathing, if visible

Where applicable, please ensure that your photos are focused well enough such that all writing is clearly legible.

2nd Sub Panel

2nd Sub Panel - Location *

Please be as specific as possible.

2nd Sub Panel - Source *

Sub-Feed Breaker on MSP
Feed-Through Lugs on MSP Bus

2nd Sub Panel - Fed by Breaker on MSP in Space

Space: 0

If none, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

2nd Sub Panel - Main Breaker Location *

2nd Sub Panel - Main Breaker Rating *

2nd Sub Panel - Bus Rating *

2nd Sub Panel - Number of Open Spaces

0 Spaces

2nd Sub Panel - 1st ≥30A Breaker SPACE

Space: 0

If none, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

2nd Sub Panel - 1st ≥30A Breaker RATING *

2nd Sub Panel - 1st ≥30A Breaker APPLIANCE(S) *

Please list all appliances on this circuit.

2nd Sub Panel - 2nd ≥30A Breaker SPACE

Space: 0

If no 2nd, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

2nd Sub Panel - 2nd ≥30A Breaker RATING *

2nd Sub Panel - 2nd ≥30A Breaker APPLIANCE(S) *

Please list all appliances on this circuit.

2nd Sub Panel - 3rd ≥30A Breaker SPACE

Space: 0

If no 3rd, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

2nd Sub Panel - 3rd ≥30A Breaker RATING *

2nd Sub Panel - 3rd ≥30A Breaker APPLIANCE(S) *

Please list all appliances on this circuit.

Photos Checklist *

Wall Area Surrounding Panel
Front of Panel with Door CLOSED
Front of Sub Panel with Door OPENED
Close-Up of Main Breaker, if applicable
All Circuit Breakers (one photo)
Close-Up of Any Label Listing Loads on Circuits, Panel Manufacturer & Model No., Panel Ratings, etc.
Front of Panel with Cover Removed
Close-Up of Any Label Inside of Panel
Close-Up of Wire-Gauge Listing on Main-Power Feeder Wire Sheathing, if visible

Where applicable, please ensure that your photos are focused well enough such that all writing is clearly legible.

3rd Sub Panel

3rd Sub Panel - Location *

Please be as specific as possible.

3rd Sub Panel - Source *

Sub-Feed Breaker on MSP
Feed-Through Lugs on MSP Bus

3rd Sub Panel - Fed by Breaker on MSP in Space

Space: 0

If none, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

3rd Sub Panel - Main Breaker Location *

3rd Sub Panel - Main Breaker Rating *

3rd Sub Panel - Bus Rating *

3rd Sub Panel - Number of Open Spaces

0 Spaces

3rd Sub Panel - 1st ≥30A Breaker SPACE

Space: 0

If none, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

3rd Sub Panel - 1st ≥30A Breaker RATING *

3rd Sub Panel - 1st ≥30A Breaker APPLIANCE(S) *

Please list all appliances on this circuit.

3rd Sub Panel - 2nd ≥30A Breaker SPACE

Space: 0

If no 2nd, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

3rd Sub Panel - 2nd ≥30A Breaker RATING *

3rd Sub Panel - 2nd ≥30A Breaker APPLIANCE(S) *

Please list all appliances on this circuit.

3rd Sub Panel - 3rd ≥30A Breaker SPACE

Space: 0

If no 3rd, leave on '0.' For a double-pole breaker which occupies 2 spaces, provide the lower of the 2 space numbers.

3rd Sub Panel - 3rd ≥30A Breaker RATING *

3rd Sub Panel - 3rd ≥30A Breaker APPLIANCE(S) *

Please list all appliances on this circuit.

Photos Checklist *

Wall Area Surrounding Panel
Front of Panel with Door CLOSED
Front of Sub Panel with Door OPENED
Close-Up of Main Breaker, if applicable
All Circuit Breakers (one photo)
Close-Up of Any Label Listing Loads on Circuits, Panel Manufacturer & Model No., Panel Ratings, etc.
Front of Panel with Cover Removed
Close-Up of Any Label Inside of Panel
Close-Up of Wire-Gauge Listing on Main-Power Feeder Wire Sheathing, if visible

Where applicable, please ensure that your photos are focused well enough such that all writing is clearly legible.

Final Details

Survey Notes

Any final details relevant to this project which couldn't be made clear elsewhere on this form and which may not be obvious in your photos.

Photos Checklist *

Nameplate Photos of Each Appliance on ≥30A Circuits

Please ensure that your photos are focused well enough such that all writing is clearly legible.

Solar + Battery Site Survey

WARNING

Site Details

Battery-Install Location

Main Service Panel

1st ≥30A Breaker

2nd ≥30A Breaker

3rd ≥30A Breaker

4th ≥30A Breaker

5th ≥30A Breaker

Sub Panels

1st Sub Panel

2nd Sub Panel

3rd Sub Panel

Final Details